Price: $$754.99
(as of Dec 06,2023 08:32:40 UTC – Details)

Product Description

12V Solar System Designed for off-grid use with the ability to easily charge most 12V batteries:

GelSealedFlooded (Wet Cell)Lithium Ion

ACOPOWER 500W Solar Panel Kit | 40A MPPT Charge Controller

This 500W Solar Kit is designed with off-grid in mind. Suitable to mount on RVs, green homes, cars, and boats.

Solar Module: 5PCS 100W Monocrystalline Solar PanelMPPT Charge Controller: 40A MPPT charge controller, Negative Grounding DesignCables:
1 Pair 30ft 12AWG cable with Female/male connector to connect to the charge controller; 1 Pair 8FT 8AWG Tray Cable to connect the charge controller to your battery; Five sets of z-brackets; 1pc waterproof cable Entry housing Branch connector:1 Pair 1Y4 M/FFFF and F/MMMM connector; Branch connector:1 Pair 1Y2 M/FF and F/MM connector

How to properly set up a basic system

First, the battery should be hooked up to the charge controller. You could use our tray cable or any general stranded copper core wire to connect the two. Make sure that you lead the wire into the battery terminal of the charge controller and match the + and – to the battery + and -. Make sure to screw in the exposed wire tightly inside the controller terminal. Then screw on the battery rings to the battery.

Second, then connect your solar panel to your charge controller. We recommend that you connect the adapter kit to your panel first, then follow the + or – sign coming off of the leads of the panels and match it with the + and – sign on the charge controller. Be careful at this step, because if the panel is inserted incorrectly, you can have reverse polarity and short the system causing damage to the panels or controllers.

Lastly, you can hook up your inverter to your battery by using battery ring cables and by matching the + to + and – to -.

100W Mono Solar Panel

Specification

Peak Power (Pmax):100WPeak Circuit Voltage(Voc):22VMax Power Voltage(Vmp):17.48VShort Circuit Current(Isc):6.14AMax Power Current(Imp):5.71AWind resistance:2400paWeight:12.8 lbDimension:40.2*20.1*1.4 InchApplication Class:Class A

40A MPPT Charge Controler

12 / 24VDC automatically identifying system voltageRated charge current: 40AMax Input Power: 520W/12V 1040W/24VMax.PV open circuit voltage:100VDC (92V at 25? temperature)Battery type selection: lead-acid (Gel, Sealed, Flooded) and LithiumNegative Grounding DesignInstallion Notes?First connect the battery?Then connect the load; Finally connect the solar panel.

Z Brackets

5 Set Mounting Z Brackets

Cables and Housing

30ft 12AWG PV Cable with female/male connector

8FT 8AWG Tray Cable

A waterproof cable Entry housing

1 Pair 1Y4 and 1 Pair 1Y2 Branch connector

100W Solar Panel
1PC 2PCS 2PCS 3PCS

Charge Controller
20A PWM 20A PWM 30A MPPT 30A MPPT

30FT PV Cable

?

?

?

?

8FT 8AWG Tray Cable

?

?

?

?

Cable Entry housing

?

?

?

?

Z Brackets
1 Set 2 Sets 2 Sets 3 Sets

100W Solar Panel
4PCS 5PCS 6PCS 8PCS

Charge Controller
40A MPPT 40A MPPT 50A MPPT 60A MPPT

30FT PV Cable

?

?

?

?

8FT 8AWG Tray Cable

?

?

?

?

Cable Entry housing

?

?

?

?

Z Brackets
4 Sets 5 Sets 6 Sets 8 Sets

5PCS ACOPOWER 100-Watt monocrystalline solar panels can be connected in parallel by branch connectors or connected in series without any connectors;
MPPT Solar Charge Controller has user adjustable settings! LCD Screen shows, voltage, solar panel status, battery state of charge, and DC load draw. See Image in photo gallery for all LCD Screen readouts. Compatible with lead acid, AGM, gel, and lithium batteries
Designed for RVs, cabins, homes, boats, back-up and remote power use. The two solar panels can be wired in parallel for 12V battery charging or in series for 24V battery charging.
Negative Grounding Design and advanced MPPT control algorithm make it charging efficiency no less than 99.5%, it maximize the charging power as a way of saving the energy.
25-year transferable power output warranty on panels and 1-year warranty on rest of the kit components