Otdair 188 LED Solar Lights Outdoor, 2500LM 3 Modes Solar Motion Lights Outdoor, IP65 Wate…

Price: $$456.59
(as of Sep 29,2023 07:55:28 UTC – Details)

Product Description

200w mono200w mono

PowerECO 200W Monocrystalline Solar Panel Kit is the key component to a system when going solar Off –Grid system.

The RV Solar Kit is designed specifically for customers new to solar. The Solar Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins – providing many benefits, including, but not limited to, quiet power production and grid independence.

Negative grounding controller ensures the broader off grid applications and safety, especially to be used on a vehicle which has battery negative on the chassis.

A little extra investment on the right charge controller will generate a much higher return and prevent system failure.


200W 30A Solar Panel Kit

Packing List

Solar Module: 2PCS 200W monocrystalline Black FrameCharge Controller:30A MPPT 1 Pair 30ft 12AWG cable with female/male connector to connect to the charge controller 1 Pair 8FT 8AWG Tray Cable to connect the charge controller to your battery;Mounts and cable Entry housing: one sets of Z-Brackets and a waterproof cable Entry Housing

200W Panel Specification Peak Power (Pmax): 200W Peak Circuit Voltage(Voc):24.3V Max Power Voltage(Vmp):20.4V Short Circuit Current(Isc):10.2A Max Power Current(Imp): 9.8A Dimension: 58.7×26.8×1.4 Inch Weight:26.5lb Test condition:1000W/m², AM1.5,25?

30A Charge Controller30A Charge Controller

30A MPPT Charge Controller


System nominal voltage: 12/24VDC automatically identifying system voltage except the lithium-ion battery.Battery voltage range: 8~32VRated charge current: 30AMax. PV open circuit voltage: 100V at At minimum operating environment temperature /92V at 25? environment temperatureMax Input Power: 390W/12V , 780W/24VBattery type selection: lead-acid (Gel, Sealed, Flooded) and LithiumNegative Grounding DesignMPP voltage range: (Battery voltage +2V)?72V




30ft PV Connector30ft PV Connector


Z Brackets

1 Sets Mounting Z Brackets

8AWG Tray Cable

1 Pair 8FT 8AWG Tray Cable

30ft 12AWG PV Cable

1 Pair 30ft 12AWG PV Cable with female/male connector

Cable Entry housing

A waterproof cable Entry housing

100w solar system100w solar system

How to properly set up a basic system

First, the battery should be hooked up to the charge controller. You could use our tray cable or any general stranded copper core wire to connect the two. Make sure that you lead the wire into the battery terminal of the charge controller and match the + and – to the battery + and -. Make sure to screw in the exposed wire tightly inside the controller terminal. Then screw on the battery rings to the battery. .

Second, then connect your solar panel to your charge controller. We recommend that you connect the adapter kit to your panel first, then follow the + or – sign coming off of the leads of the panels and match it with the + and – sign on the charge controller. Be careful at this step, because if the panel is inserted incorrectly, you can have reverse polarity and short the system causing damage to the panels or controllers

Lastly, you can hook up your inverter to your battery by using battery ring cables and by matching the + to + and – to -.

Convenient Installation | Expandable Power | Climate Elements Resistance

Easy  to InstallEasy  to Install


High EfficiencyHigh Efficiency

Easy Installation

The solar panel kit comes with pre-drilled holes for the screws and mounts required for RV, boat, car, or home roof installation.The kit also includes a 35 inch 12AWG cable with male/female PV connectors.

Recommended to purchase an extra 8AWG cable to connect the battery and fuse.


The Powereco 100W Solar Kit is expandable up to a total of 300W with the addition of one or two solar panels and PV T/Y branch connectors.

300W total: connect a 100W solar panel to this solar panel kit, in parallel, to achieve up to 300W.400W total: connect two 100W solar panels to this solar panel kit, in parallel, to accomplish up to 400W.12v in parallel, 24v in series.

High Efficiency & Weather Resistant

The lightweight anodized aluminum frame and the reinforced, safe, and anti-reflection coated glass, which is 3.2mm thick, design allows for:

High Modules Conversion EfficiencyHigh wind resistance up to 2400Pa Snow load tolerance suitable for up to 5400PaHeavy rain immunity up to IP-65 in waterproofness

Complete kit includes: (1)1Pack 200 Watt 12 Volt Mono Solar Panel (2)30A MPPT Charge Controller(3)30ft 12AWG Solar Adaptor Kit (4) 8ft 8AWG Tray Cable(5) Cable Entry Housing(6)1 set z-brackets
Easy installation with pre-drilled hole; each solar panel comes with 35 inches 12AWG cable with PV male/female quick connectors; all you need is a cable to your battery and fuse
Designed for RVs, cabins, homes, boats, back-up and remote power use. The two solar panels can be wired in parallel for 12V battery charging or in series for 24V battery charging.
MPPT charge controller peak efficiency: 99.5%,This kit includes our 30A MPPT charge controller which uses Maximum Power Point Tracking technology, transferring power up to 30% more efficiently than PWM charge controllers
Order will be delivered in multiple packages


Write a comment