(as of Nov 29,2023 22:54:04 UTC – Details)
100 Watt Portable Foldable Solar Panel, 100W Folding Solar Battery Charger, DC 5V ·14V· 19V Output
It is designed for most portable power station generator on market, compatible with Jackery,SUAOKI, Enkeeo, Goal Zero, Webetop, Paxcess, ROCKPALS, , Flashfish etc.
Also for mobile phone, power bank, tablets, laptop and 12V car boat RV batteries etc.
Perfect for yard, tent, hiking, camping, trekking, climbing, drive travel, car/boat/RV battery and other outdoors and emergency.
Included different size of connectors: 8 mm DC adapter (7.9*5.4 mm), 6.5*4.4 mm, 6.25*3.0 mm, 5.5*2.5 mm, 5.5*2.1 mm, 4.75*1.7 mm, 5.5*1.7 mm, 4.0*1.7 mm, 5.0*3.0 mm, 7.4*5.0 mm, 3.5*1.35 mm, aviation plug.
Multipurpose Renewable Foldable Solar Panel
The SolarFairy series solar panels charges power station,phones,batteries and other devices with ease and simply plug in.
Ensure that the port is plugged into the supporting connector cable.
Open your solar panel and face the panels towards the sun and check the Solar Intensity Indicator for current solar conditions.For the best charging effect,please aim at the sun and keep three or four lights on.
Plug your devices into the port through the approprite connector cable and charge it
The figure above takes SolarFairy 100 as an example
NOTE?Before test the 14.4V port voltage, need to connect a load/battery to activate.
Safe Solar Panel
Short Current Protection
Over Power Protection
FCC/ ROHS /CE Certification
Durable Solar Panel
The solar panel is fully Laminated
Made by advanced laminated technology and long lasting material
Higher light transmittance
Convenient Solar Panel
Solar panel is equipped with brackets
Can be easily used anywhere
Build in Solar Intensity Indicator that Can more easier to adjust the angle to get more sunlight
Portable & Foldable Solar Panel
Because of the Portable and Compact Design, it can be folded into 20.2*15.1*1.7 inch
Equipped with bag that is much easier to take it to explore more
Powering USB-A & USB-C Devices
There are 2 USB Outputs Powering 2 USB Outdoor Devices
USB-A:5V/3A,9V/2.5A,12V/2A (Supporting QC3.0)
USB-C:5V/3A,9V/2.5A,12V/2A (Supporting QC3.0/PD3.0 Charging)
Alligator Clip Cable for 12V Battery
Extension cable compatible with MC4 connector
Cigarette lighter for car
10-in-1 Connectors for Laptops and Generators
2 Pair 6.5 ft DC to DC Extension Cables
Peak Power: 100 W
Cell Efficiency: 23%
Power Voltage: 19V
Power Current: 4.5A
Open Circuit Voltage: 24V±5%
USB Outlets: 1*USB-A(5V, 3A), 1*USB-C(5V, 3A). Note: USB-C support PD charging.
1.Before test the 14.4V port voltage, need to connect a load/battery to activate.
2.Any questions,please let us konw.We will work to make you satisfied.
Q1:Why the solar can not produce 100W power when charging to power station?
As we all know, the power generation of solar panels is affected by many factors. For example, the irradiance of light and the receiving angle of the panel. The rated power of 100W is the power tested under standard conditions (AM1.5, 25°C, 1000W/m2). Irradiance and temperature are the main factors that affect the power generation of solar panels. In the actual working environment, the irradiance and temperature are constantly changing, and there are also efficiency losses in mobile power station charging. It is impossible to charge 100% of solar power. Into the mobile power station. Therefore, the rated output power cannot be produced.
Q2:Why our solar panels are not compatible with Goalzero Yeti
In order to adapt to most of the mobile power stations on the market, the open circuit voltage of the solar panel is set to about 24V, while the adaptation voltage of Goalzero is narrow, only 12-22V. When Goalzero detects that the input voltage exceeds 22V, it will prohibit charging. . So it is not compatible (if you are a Goalzero user, please let us konw, we will give you a custom step-down box to reduce the voltage to 21V to fit your power station).
Q3: Why does the 14.4V port need to be activated to measure the voltage?
The 14.4V interface is a dedicated interface for battery charging. For safety reasons, this output is allowed to supply power only when the battery is detected.
Q4.Last but not least
In the previous upgrade, 100W SolarFairy were incompatible with some portable power station, and we have all been resolved and can compatible with most portable power station now.
DC 19V Output
DC 14.4V Output
QC3.0 & PD3.0
?Designed For Most Portable Power Station?The 19V DC port is specially designed for charging portable power stations and equipped with cables and connectors of different specifications
?USB Smart and Fast Charging Technology? Dual USB Ports QC3.0 & 2.0 (5V/9V/12V 2A max), and the USB-C port support PD3.0.Designed for smartphones and tablets (compatible with iPhone, iPad, Samsung Galaxy), GPS, digital cameras etc. Perfect for outdoor life and even unexpected power outages. The build-in smart IC chip intelligently identifies your device, and maximizes its charging speed while protects your devices from over charging and overloading.
?Foldable&Portable?After being folded, the size is only 9.84*7.87*2.36 inch. You could easily pack it into backpack or trunk to explore the world. At the same time, the panel is equipped with adjustable brackets.You could adjust the angle of the solar panel at will to obtain a higher output power.
?Powerful High Conversion Efficiency? With high efficiency monocrystalline solar cell, you will get greater power efficiency even though the panel is smaller than a traditional model Maximizes system output by reducing mismatch loss. It performs better than similarly rated polycrystalline solar panels at low-light conditions
?Durable? The solar panel is fully Laminated, made by advanced laminated technology and long lasting ETFE material. NOTE?Before test the 14.4V port voltage, need to connect a load/battery to activate.